Sony Camera Remote App Mac

  

Remote

For the Remote shooting, stabilize the camera with a tripod or using some other method, and then connect the camera to the computer.
The connection and setting methods vary depending on the model.

Connecting ILCE-9M2/7RM4 to a computer

You can connect the camera via USB using a USB cable, wired LAN connection*, or wireless W-Fi connection.
* Supported devices: ILCE-9M2

CameraCamera

  1. On the camera, perform the following setting.

    • MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [Off]
    • MENU → (Network) → [PC Remote Function] → [PC Remote] → [On]

  2. On the camera, select [PC Remote Cnct Method] from the following options.

    [USB]

    Connect the camera and computer using the supplied USB cable.

    [Wired LAN] (ILCE-9M2 only)

    Connect the camera and computer using a general LAN cable sold in the market. After connecting, perform pairing of the camera with the computer. Connection method

    1. Connect the camera and computer or switching hub using a LAN cable.
    2. Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
      If [Connect without Pairing] is available on the camera, set it to [Enable] to connect without pairing.

    [Wi-Fi Direct]

    Connect the camera and computer using Wi-Fi without passing through an access point. Connection method

    1. Select [PC Remote Function] → [Wi-Fi Direct Info.] to display an SSID and password of the camera.
    2. Perform a Wi-Fi connection to the camera from the computer using the displayed SSID and password.

    [Wi-Fi Access Point]

    Connect the camera and computer using Wi-Fi via an access point. It is necessary to perform pairing of the camera and computer. Connection method

    1. Select (Network) → [Wi-Fi Settings] → [WPS Push] or [Access Point Set.] to connect the camera and computer to the same access point.
    2. Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
      If [Connect without Pairing] is available on the camera, set it to [Enable] to connect without pairing.

  3. On the computer, launch Remote.

  4. If multiple cameras are connected to the computer, select a camera to use for Remote Shooting from the device selection window.

Remote Camera Control App

The Sony a9, a7iii, a7Riii, and RX10 IV don't support the Smart Remote Control feature. If that’s the case, you just connect your camera by setting 'Ctrl w/ Smartphone' in the camera's settings. Due to some changes by the manufacturer, some camera models don't. Smart Remote Control (PlayMemories Camera App) Applicable Products and Categories of This Article. Below is a list of common questions and answers about using Smart Remote Control and its bundled features. IMPORTANT: Smart Remote Control is only supported for installation on select Sony® camera.